| Customization: | Available |
|---|---|
| Type: | Li-ion Battery |
| Cathode Material: | LFP |
|
Still deciding? Get samples of US$ 800/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| MODEL | CTS4850R | CTS48100R | CTS48200R |
| ELECTRICAL SPECIFICATIONS | |||
| Cell Type - Chemistry | LiFePO4 | LiFePO4 | LiFePO4 |
| Rated Capacity | 50Ah | 100Ah | 200Ah |
| Rated Voltage | 51.2V | 51.2V | 51.2V |
| Energy | 2.56kWh | 5.12kWh | 10.24kWh |
| MECHANICAL SPECIFICATIONS | |||
| Dimensions (L x W x H) | 442*410*133mm | 442*435*155mm | 442*820*155mm |
| Weight | 28Kg | 48Kg | 82Kg |
| DISCHARGE SPECIFICATIONS | |||
| Discharge Cut-off Voltage | 40V | 40V | 40V |
| Max Continuous Discharging Current | 50A | 100A | 150A |
| Recommended Disharge Current | 25A | 50A | 100A |
| CHARGE SPECIFICATIONS | |||
| Charging Limited Voltage | 57.6V | 57.6V | 57.6V |
| Max Charging Current | 50A | 100A | 150A |
| Recommended Charge Current | 25A | 50A | 100A |
| Working Temperature Range | Charge: 0~45ºC discharge : -20~60ºC |
||
| Recommended Operating Temperature | 15~35ºC | ||
| Recommended Storage Temperature & Humidity Range | 15~35ºC, 45~75%RH | ||
| CTS | Other | |
| Plastic holder | 1.We use customized plastic holder between each cells for better insulation, so when the operator install batteries, there will be no danger. | No holder between cell, insulation need to be concerned. |
| Top extension | 2.There is an extension at the top of the bracket. When there is a shock or heavy drop or vibration, battery itself will not be the first to bear the brunt | Have a metal top extension in the first one, no top extension in the second |
| Unblocked explosion-proof valve | 3.The explosion-proof valve is not blocked, the physical structure safety of the cell is ensured | Both has blocked explosion-proof valve, not meet the cell safety using requirements |
| BMS with cover | 4.BMS is well protected by metal cover, prevent damage for shock | No cover on both BMS |
| Laser welding+Screws | 5. We use laser welding around the srew to further strengthen the connection to completely eliminate the risk of screw falling. Laser welding also reduce the contact surface between the screw and the bus bar to enhance current capability. This laser welding can also reduce internal resistance and reduce power consumpution. The user can get more power. | First has untidy welding, big risk of damage cables, second only srews. |
| Orderly cable arrangement | 6. Orderly cable arrangement can reduce poor connector contact, short circuit and open circuit between wires. | lack of standardization, cables go through basbar in the first, disorder cables in the second |
){kind=link}